INPA BMW

January 26, 2019

Here go cases… Running inpa software on BMW E46, E90

INPA on BMW E46

Purpose: reset BMW E46 airbag light

Tools for use:

The E46 is before 2000 without the OBD2 port and the DLC port is a round 20 pin connector while INPA cable has only 16 pin connector, so I need a 20 pin to 16 pin connector

INPA K DCAN BMW E46 airbag reset DLC port 1 INPA BMW

The DLC port location on BMW E46:

bmw dlc INPA BMW

Test procedure:

Run INPA software on WIN XP. Turn on the ignition and click the “F2” button. And choose “Body” section then “Airbag”.

INPA K DCAN BMW E46 airbag reset 3 1 INPA BMW

Go to the Error Memory: click the “F4” button.

INPA K DCAN BMW E46 airbag reset 4 1 INPA BMW

Go to clear error memory: click the “F2” button.

INPA K DCAN BMW E46 airbag reset 5 1 INPA BMW

Error was cleared!

reset BMW E46 airbag light successfully!

INPA K DCAN BMW E46 airbag reset 6 1 INPA BMW

inpa bmw e90

Purpose: Code BMW E90 (2008) Injector

Tools to use: k+dcan cable

Test process:

connect the INPA cable with my E90 N54 via OBD port

run INPA software. And pressed F9 on the keyboard to select vehicle model E90

BMW INPA software 1 INPA BMW

select Engine option -> MSD80 concerning option

BMW INPA software 2 INPA BMW

press F9 system diagnostic

BMW INPA software 3 INPA BMW

press [shift+F4] EOL injector option

BMW INPA software 4 INPA BMW

The interface of MSD80 injector coding program, Check the injector parameters

BMW INPA software 5 INPA BMW

copy and paste the injector code and pressed OK to continue

Notice that the injector code are stamped onto the injector in white, there will be 2 rows of 3 numbers, for example, here: 582 227

BMW INPA software 6 INPA BMW

BMW INPA software 7 INPA BMW

Finally check the injector value and press [clear] to reset it.

Leave a Reply

Your email address will not be published. Required fields are marked *