VCDS 18.2.1 VAG-COM K+CAN HEX interface for VAG car Interface not found problem still puzzle our client for it. Below share VCDS 18.2.1 Vagcom Cable VCDS 18.2.1 VAGCOM Interface not found solution solution as following.


VCDS VAG-COM 18.2.1 Problem:


I was able to register the VCDS 18.2.1  software successfully but now I can’t seem to get the port to work.

Every time i plug the cable into the car and try to save the port, it tell me that the interface is not found. But when the cable is not plugged into the car, the port works fine…..

Help is appreciated ..: thank you


VCDS interface not found VCDS 18.2.1 VAG COM Interface Not Found Solution VCDS 18.2.1 VAGCOM VCDS Cable Solution:


Reinstalled the VCDS software and choose install 32-bit EXE on 64-bit System

VCDS interface not found solution VCDS 18.2.1 VAG COM Interface Not Found Solution

Need Ross-Tech VCDS 18.2.1 VAG-COM 1:1 Original Plan VCDS HEX K+CAN Interface just contact us freely. Kindly note: we do not offer after-sales for the product from other supplier, need anyhelp pls keep your order number from ask for help. Thanks.


Focus On OBD Tool Since 2008




Leave a Reply

Your email address will not be published. Required fields are marked *