How to installed Ford IDS VCM2 Ford Diagnostic Software
Ford IDS V108.01 VCM2 Ford Diagnostic updated for VCM2 Ford VCM II Ford Diagnostic Software support online programming released on Jan. 2018. Ford IDS V108 with Ford VCM2 for Ford diagnostics & programming till 2017. Some customer get Ford IDS v108 but can not installed it, here eobdtool.com share VCM2 Ford IDS software installation Guide.
Software Version: 108.01, no need activation
Operating system: Windows XP/Windows 7 32/64 bit
Tested with all VCM2 SP177 series, Ford VCM2 2-in-1 clone and VXDIAG VCX NANO Ford: Never failed!!
Online programming: Supported! but you should have an account yourself.
Ford IDS Software v108.01 function:
1. Ford IDS Software with VCM2 Able to download the very latest calibration files/software from Ford server if the network connection available at the time of connecting to vehicles
2.Ford IDS software with VCM2 Read and decode fault codes
3. IDS Software with VCM2 Can Delete fault codes
4.Display System current parameters in digital form
5.Combined displaying of data
6.Logs Keeping: write and keep of digital parameters in memory
7.Special functions: changing of permissible seeting of blocks, programming etc.
Q: Whether Ford IDS V108.01 can work with Ford VCM 1 Clone?
A: Yes, it can work with Ford VCM 1 clone
Q: Is this Ford IDS v108 installed vmware or native
A: This is native, install on new and clean windows xp/7
Eobdtool.com Ford IDS V108 Installation Guide step by step:
What need prepara before Ford IDS V108 installation?
1. Please backup the important files on the desktop and disk C because the next operation will cover the content in the disk C.
2.Disable both local area and wireless network connection
3. If your computer hard drive only has one partition, please prepare a 16 GB U flash drive, if has 2 partitions, please unzip the software of CD into another partition except disk C
Step 1: Recover System
Open Software D (Disk D)
Create new folder Ford 108
Copy all zip file on Ford 108-2 software CD to Ford 108 folder
Eject Ford 108-2 DVD-ROM to DVD/CD-RW Drive
Then delete all other zip files, ford108.part01-ford108.part33
(only 3 files left)
Open Ghost 8.0
Step 2: Install Ford IDS 108 Setup
Run Ford Module Programming Limit as Administrator
Ford Extension Success, press OK
Module programming has been extended to 2018/05.26
Click on Start menu->All Program->Bosch->VCM Manager (Ford-VCM-II)
If system prompt PC software initialization error, press OK to ignore
Open Disk C/Progam Files/Ford Motor Company->IDS->Runtime->install3rdparty->
ETAS, Run setup as Administrator
Install Bosch VCI software Ford VCM II
Again run setup as Administrator
Ready to install the program
Install setup completed.
Step 3: Make Connection
Click Start Menu->VCI Manager (Ford-VCM-II)
Connect VCMII with computer follow the diagram below
Open Computer->Manager->Device Manger->Network adapters->ETAS VCI USB RNDIS Device
to check connection is built
Open Network and Sharing center->Change adapter settings
Make sure you have disable both local area and wireless network connection
Step 4: Run software
Open Ford IDS v108 software on desktop
Network test, gathering vehicle data
check language options, programming modules and options
If customer need Ford IDS V108 Installed ready to use, eobdtool.com offer Ford IDS V108 VCM2 Diagnostic software installed on laptop full set, can get it here>>
Any need for Ford IDS Software HDD with VCM2 Ford vcm2 Ford Diagnostic tool installed Ford IDS Software V108 Ford Diagnostic software on Thinkpad T43 0laptop , just contact us freely.
Focus On OBD Tool Since 2008