wiTECH Micropod 2 Work With DRB III Emulation

Whether Chrysler wiTECH Micropod 2 can work with DRB III Emulation? Most Customer inquiry wiTECH Micropod 2 Chrysler with DRB III Emulation or not. We can only make sure the Witech Micropod 2 support online programming. Here’s eobdtool.com customer solution to make Clone wiTech Micropod 2 Chrysler diagnostic tool work with DRB Emulation.


Eobdtool.com wiTECH Micropod 2 Intention:

Trying to find one micropod II that would work properly with DRB Emulation. Especially with Chrysler Crossfire.

Credit to Radius from Mhhauto. You are at your risk.


Eobdtool.com wiTECH Micropod 2 Test procedure:

Test 3 different micropod interfaces. 2 devices did not work with DRB III emulation at all, no matter which vehicle. The 3rd device worked and it worked on Chrysler Crossfire – access to ALL modules.

I think the 2 devices which did not work are missing hardware for K-Line or some such.

The device verified working is an OFFLINE ONLY version of witech micropod 2, but I only use it for diagnostics, not for programming as I do not have a TechAuthority account. So if you need one for online use this is not the unit to buy.


wiTech micropod 2 purchase:


wiTech MicroPod 2 How to Make Clone Chrysler wiTECH Micropod 2 work with DRB III Emulation

How to get eobdtool.com witech to work with Enhanced DRB III Emulator:

1: Make a backup copy of the partition from the hard drive included with the micropod!

2: Install HDD in laptop

3: Set date to 01/01/17 BEFORE booting from laptop

4: Boot to HDD

5: Allow windows to install drivers, etc, as needed for your laptop and reboot as needed.

6: Once all of that is done, do NOT run WiTech yet!

7: Turn OFF internet!

8: Navigate to C:\ProgramData\wiTECH\jserver\data\core\stubs

9: Install DRB Emulator stub

10: Install DRB Enhanced emulator stub

11: Install K-Line stub

12: Reboot computer

13: ALLOW internet access

14: Run Flexnet software updater. Do NOT update WiTech!!!

15: Flexnet will find updates for enhanced DRB and K-Line

16: Install K-Line update first

17: Install Enhanced update next.

18: Once updates and downloaded and installed, turn OFF internet and NEVER turn on again!

19: Reboot computer

20: Attach Micropod to car. When green LED turns on, turn on car ignition

21: Attach USB cable to PC and witech Micropod 2

22: When Windows is done installing drivers, etc, you should show a network connection in the tool tray with no internet access

23: Run Wi-Tech

24: Press “Launch DRB III” button in lower right hand corner

25: Accept EULA

26: DRB Emulator will launch.

27: Enjoy.


Here is a Mega link to a backup image of working installation.


Link to HDD image/backup file of working OFFLINE WiTech installation with working DRB III Emulation:



HDD Partition backup made using Image for Linux from Terabyte Unlimited. You can download trial version here:



Follow instructions to make bootable USB thumbdrive

Copy image file to spare HDD and connect to laptop with USB adapter.

Boot laptop to USB thumbdrive

Follow prompts to restore backup to laptop HDD partition.

Any need for Chrysler wiTECH Micropod 2 Chrysler diagnostic tool Mopar Micropod 2 just contact us freely.


Focus On OBD Tool Since 2008

Follow Us:www.facebook.com/eobdtool





Chrysler Witech Micropod II Program 2014 Jeep Wrangler Using Guide


Leave a Reply

Your email address will not be published. Required fields are marked *