How to use wiTECH Micropod II program 2014 Jeep Wrangler

Chrysler Witech Micropod II online version hot sale on, some custom order wiTECH micropod 2 from other supplier and stop work, we can offer wiTECH Chrysler diagnostic software installation service make wiTECH micropod 2 restart work. Or order wiTech Micropod 2 from directly. Below customer share how to use wiTECH Micropod II program 2014 Jeep Wrangler.


Chrysler wiTECH Micropod II Mopar Micropod 2 with wiTECH V17.04.27 For Chrysler/Dodge/Jeep/Fiat

 witech micropod 2 software Chrysler Witech Micropod II Program 2014 Jeep Wrangler Using Guide Chrysler wiTECH Micropod 2 Mopar Micropod II Program 2014 Jeep Wrangler Guide:

SUCCESS! Everything worked.

I was able to program the second key to my Jeep. You are amazing and I cannot thank you enough. Here is what I did on my 2014 Jeep Wrangler:

Situation: My Jeep came with only ONE key and I wanted a second key.

You must have Witech 16.05.15 or older installed. Witech 17 gave me errors about requiring Witech 2.0.

First try: (Failed, did not work)

Step 1) No key in the ignition, plugged in wiTECH Micropod 2 to OBDII port.

Step 2) Connected Micropod 2 to laptop via USB cable.

Step 3) Opened Witech and it asked me to identify my Jeep and enter my VIN.

FAILED at this point. It required internet connection to validate the VIN and asked me to log into Dealer CONNECT or Tech Authority.

Second try (SUCCESS!!)

Step 1) No key in the ignition, plugged in Micropod 2 to OBDII port.

Step 2) Put my single good key in the ignition and put it to the RUN position.

Step 3) Connected Micropod 2 to laptop via USB cable.

Step 4) Opened Witech and left it offline.

Step 5) Opened WCM, then Misc. Functions, then Program FOBIK

Step 6) Entered my dealer supplied PIN.

Step 7) Removed old key and inserted new key.

Step 8) Be happy I now have two working keys to my Jeep.


Any need for Chrysler wiTECH Micropod 2 Chrysler diagnostic tool Mopar Micropod 2 just contact us freely.


Focus On OBD Tool Since 2008





Leave a Reply

Your email address will not be published. Required fields are marked *