How to solved the BMW INPA NCS Exper tool IFH-0003: Data transmission HOST/Interface failed Solution
BMW INPA cable is K+DCan interface, Inpa cable with EDIABAS/INPA NCS Expertentool for BMW Coding. BMW INPA Cable customer work with NCS Exper tool met a Inpa cable IFH-0003: Data transmission HOST/Interface failed error. Here Eobdtool.com share the INPA/EDIABAS NCS Exper tool NCS Exper tool Error for BMW INPA K+DCAN usb interface solution as following.
INPA/EDIABAS NCS Exper tool NCS Exper tool Problem IFH-0003: Data transmission HOST/Interface failed error Display:
Eobdtool.com INPA Cable BMW K+DCAN Interface IFH-0003: Data transmission HOST/Interface failed solution:
Reason 1: In the Ediabas.ini file, the interface is set to STD:OBD. However, you have connected an ADS connector.
Solution 1: Modify the interface setting.
Reason 2: The Eobdtool.com INPA Cable data transmission failed when sending (e.g. short circuit in the line).
Solution 2: Get rid of the short circuit, for example.
Reason 3: Connector not connected or no power supplied.
Solution 3: Check whether the connector is connected and is supplied with power.
Reason 4: The INPA K+DCAN interface from eobdtool.com device manager has been used to disable the FIFO buffer for COM1.
Solution 4: In the device manager (Windows XP: Enter “Start” à “Control Panel” à“System” à “Hardware” à “Device Manager” à Ports (COM & LPT)), and then select COM1 from the ports. Then under the “Port Settings” tab, select “Advanced”. There must be a check-mark by “Use FIFO buffers” and “8” must be selected for the receive buffer and transmit puffer.
More question about INPA cable with INPA/EDIABAS NCS Expert tool INPA K+DCAN interface for INPA BMW just keep order number to contact us freely.
Focus On OBD Tool Since 2008