China Auto Diagnostic Tools, OBD2 Scanner Wholesale Center

  • Supplier BeeProg2C Universal Programmer Elnec Beeprog 2C Multiprogramming Replace BeeProg/Beeprog+ Programmer

BeeProg2C Universal Programmer Elnec Beeprog 2C Multiprogramming Replace BeeProg/Beeprog+ Programmer

  • Item No. 2606 History: 0 sold

  • Details
  • Technical Service
  • Payment&Shipment
  • Reviews(0)
BeeProg2C Universal Programmer Elnec Beeprog 2C Multiprogramming can replace BeeProg/Beeprog+ Programmer,Elnec Beeprog2C Beeprog2 Multiprogrammer from eobdtool.com is Universal USB Interfaced Programmer,support extremely fast programming of DIP, SDIP, PLCC, JLCC, SOIC, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP etc

BeeProg2C Universal Programmer Elnec Beeprog 2C Multiprogramming Replace BeeProg/Beeprog+ Programmer


Elnec Beeprog2C Multiprogrammer Beeprog2C Universal USB Interfaced Programmer Beeprog 2c Programmer can replace Beeprog


Elnec Beeprog2C/Beeprog2 Programmer is Extremely fast universal USB interfaced programmer,

Elnec Beeprog2C Programmer Short description:

102081 supported devices from 333 manufacturers by 3.33 version of SW (29. Jun. 2017)

extremely fast programming, one of the fastest programmers in this category.

Sustainable programming speed greater than 5 MBytes per second.

Programs 2 GB eMMC NAND Flash in less than 365 sec.

48-pins powerful pindrivers, no adapter required for any DIL devices

ISP connector for in-circuit programming

connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface

after upgrade to BeeProg2, also high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface is available

comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10 (32-bit and 64-bit*)

unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software

Multiprogramming possible by attaching more programmers to one PC


What's Beeprog 2C Programmer Feature?

 

GENERAL

 

BeeProg2C is USB-compatible, MS Windows (from Windows XP to Windows 10 32-bit and 64-bit) based ELNEC universal programmers, built to meet the strong demand of the small manufacturing and developers community for the fast and reliable universal programmer.

BeeProg2C programmer have hardware identical with the BeeProg2 programmer, the differences are only in software. BeeProg2C have next limitations against BeeProg2:

unsupported obsolete bipolar chips (PROMs and PLDs)

unsupported obsolete EPROMs with programming voltage 21V and above

unsupported obsolete 2708 EPROMs

unsupported obsolete microcontrollers MCS48 series

unsupported obsolete microcontrollers 8751/8752 with programming voltage 21V and above

LPT port connection usage is disabled in software

BeeProg2C programmer from eobdtool.com can be any time upgraded to BeeProg2 using BeeProg2C to BeeProg2 upgrade kit

Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family-specific module. You have freedom to choose the optimal device for your design. Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP capable chips in circuit.

BeeProg2C isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it allows generation of user-definable test pattern sequences.

Provides very competitive price coupled with excellent hardware design for reliable programming.

Extremely fast programming due to high-speed FPGA driven hardware and execution of time-critical routines inside of the programmer. As a result, when used in manually-operated production, this one-socket-programmer in most cases waits for an operator.

BeeProg2C interfaces with any IBM PC compatible personal computers, running MS Windows OS, through USB (2.0 HigSpeed) port. After upgrade to BeeProg2 can be also used through parallel (printer) port.

 

HARDWARE

 

FPGA based totally reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Improved pin drivers drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.

The programmer performs device insertion test based on the check of proper signal path between the programmer and programmed device before it programs each device. In dependence on programming configuration it identifies missed or poor contact between programmed device and the ZIF socket of the programming adapter (or the programmer directly), missed or poor contact between the programming adapter and the programmer and it's also able to indicate wrong position of device in the ZIF socket of the programmer / the programming adapter (moved, rotated, backward oriented). These capabilities, supported by overcurrent protection and signature-byte check help prevent chip damage due to operator error.

The selftest capability allow to run diagnostic part of software to thoroughly check the health of the programmer.

Built-in protection circuits eliminate damage of programmer and/or programmed device due to environment or operator failure. All the inputs of the BeeProg2C programmer, including the ZIF socket, connection to PC and power supply input, are protected against ESD up to 15kV.

BeeProg2C programmer performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield, and guarantees long data retention.

When programming specification require, the (BeeProg2C) programmer performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield, and guarantees long data retention.

Various programming adapters are available to handle device in PLCC, JLCC, SOIC, SDIP, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP and other packages.

 

Eobdtool.com Kind note for Beeprog 2C/Beeprog2 programmer:

 

 Microsoft 64-bit operation systems doesn't allow direct access to LPT port, therefore the communication speed between PC and programmer is very low. In case of Windows x64 OS we recommend to use only USB connected programmers. 

 

Beeprog 2C/Beeprog2 programmer Package support:

 

support devices in DIP into socket of the programmer

package support includes DIP, SDIP, PLCC, JLCC, SOIC, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP etc.

devices in non-DIP packages up to 48 pins are supported, if possible, by universal programming adapters

programmer is compatible with many third-party adapters for non-DIP support

 

Specification:

operating voltage 100-240V AC rated, 90-264 VAC max., 47-63 HZ

power consumption max. 20W active, about 2W sleep

dimensions 195x140x55 mm (7.7x5.5x2.2 inch)

weight 0.9kg (1.98 lb)

operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)

operating humidity 20%..80%, non condensing


Package includes

BeeProg2C programmer or Beeprog2 Programmer * 1pc

 

Contact Information:


Skype: eobdtool02

WhatsApp: +86 13728823411

Email: sales01@eobdtool.com


    Write a Review
    *Rating:
    Please select rating stars.
    * Your First & Last Name:
    *Your E-Mail Address:
    * Review Detail:
    * Verification Code:

SIGN UP FOR SAVINGS!

Get Coupon & Upate!


Maybe you also like ...

VXDAS VX09
Live Chat by comm100